LIGHT SOURCE
Source: 130W 6 colour custom LEDs source (red, orange, green, royal blue, blue, lime)
CCT: 2.800 K – 10.000
Luminous flux: (16°) 1'610 lm – (80°) 2'952 @full
Lux: (16°) 709 lx – (80°) 145lx @5 m full
CRI: 91 @3.200 K; 92 @5.600 K
R9: 95 @3.200 K; 93 @5.600 K
TLCI: 86 @5.600 K
TM30 Rf: 88 @3.200 K; 86 @5.600 K
TM30 Rg: 106 @3.200 K; 104 @5.600 K
Source life expectancy: > 50.000 h
OPTICS
Zoom: 16° – 80° manual
Lens diameter: 6'' – 150mm / 0.24''
Lens type: fresnel zoom lens
COLOUR SYSTEM
Colour mixing: tunable white + colour
CCT: CCT control, + / – green correction, tungsten emulation
White presets: 2.800 K – 10.000K
Colour wheel: virtual colour wheel with macros
Macros: several pre-built macros with adjustable speed
DYNAMIC EFFECTS
Static mode: selection of static colour
Manual mode: manual adjustment of intensity, CT, colour correction from knob
Auto mode: built-in programs with execution speed adjustment
Special features: linear crossfade channel from any white to any colour; virtual CTO on colours
BODY
Hardware on-board: filter frame, 8 doors barndoor, spigot
Body: sturdy die-cast aluminium body
Body colour: black, white finishing available
CONTROL
Protocols: DMX512, RDM, rotatory knob
DMX channels: 1 / 2 / 5 – 1 / 5 – 2 / 7 / 9 / 12 / 13 / 16 / 19 / 21channel
RDM: RDM for remote monitoring and settings
Display: Graphic User Interface
Firmware upgrade: yes, via USB – DMX interface (UPBOXPRO/UPBOX1) not included
Other: 16bit control of dimmer and colour
ELECTRONICS
Dimmer: linear 0 ~ 100% electronic dimmer
Dimmer curves: 4 selectable dimming modes available
Strobe / shutter: 1 – 30 Hz, electronic
LED Control: flicker free frequency with adjustable PWM
Selectable PWM: 600 ~ 25.000 Hz
ELECTRICAL
Mains power supply: 100-240V – 50/60Hz
Max power consumption: 106W
Output (at 230V): 22 units on a single power line
Power factor: >0,95
Inrush current: 110VAC/1.9A, 230VAC/6A
BATTERY
Battery: 29,6V 4400 mAh external battery (optional ECLFRSJBP4)
Re-charge connection: connection for external battery throught XLR 4p
Other: Voltage range: 22,4V-33,6V
PHYSICAL
IP rating: 20
Cooling: combination of heat pipe cooling system and low noise fan
Suspension and fixing: bracket for hanging and positioning
Signal connection: Amphenol XLR 5p IN/OUT connectors
Power connection: Neutrik powerCON TRUE1 IN/OUT connectors
Dimensions (WxHxD): 235x360x260mm / 9.25''x14.17''x10.24''
Weight: 6kg / 13.23lbs
CERTIFICATIONS / APPROVALS
Certifications / Approvals: CE, UKCA, RCM
BOX CONTENT
1 x ECLFRESNELJTW
1 x 1,5 meters power cable (BARE END – NEUTRIK POWERCON TRUE1 IP65)
1 x ECLFRSPG
1 x ECLFRSJBD
1 x ECLFRSJTPG
User Manual
|
